PCE Instruments

The Dynamometer PCE-DFG NF 2K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

– Measuring range: 0 … 2 kN / 2,000 N / 450 lbs
– Resolution: 0.2 N / 0.04 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-DFG NF 50K with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has several threaded holes on the underside, which enable a fixed installation.

– Measuring range: 0 … 50 kN / 50,000 N / 11,240 lbs
– Resolution: 5 N / 1.1 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The Dynamometer PCE-DFG NF 50K-ICA with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has several threaded holes on the underside, which enable a fixed installation.

– Measuring range: 0 … 50 kN / 50,000 N / 11,240 lbs
– Resolution: 5 N / 1.1 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

– Measuring range: 0 … 5 kN / 5,000 N / 1,124 lbs
– Resolution: 0.5 N / 0.1 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The Dynamometer PCE-DFG NF 5K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

– Measuring range: 0 … 5 kN / 5,000 N / 1,124 lbs
– Resolution: 0.5 N / 0.1 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-FM 200-ICA is a handheld device that measures up to 200 N. The dynamometer can determine the units N, kg and lb. The dynamometer is supplied with various adapters that have different shapes. The dynamometer can measure both tensile and compressive forces.

– Measuring range: 2 … 200 N / 0.2 … 20 kg / 0.4 … 45 lbs
– Measurement accuracy: ?0.5%
– Units: N, KG, lb
– Integrated load cell with M6 connection
– Evaluation via USB interface
– Downloadable evaluation software
– Incl. ISO Calibration Certificate

The PCE-FM 500N-ICA dynamometer is a microprocessor controlled dynamometer with fast and accurate readout of tensile and compressive forces in N, Kg and lb. The display of the force gauge is easily readable by the large numbers. The force gauge is equipped with an internal load cell for tensile and compression tests.

– Measuring range: 5… 500 N / 1.1 … 112 lbs
– Resolution: 0.1 N / 0.02 lbs
– Different shaped measuring adapters
– Evaluation via USB interface
– Device for mounting on test stands
– incl. ISO Calibration Certificate

This dynamometer is a tensile / compressive force gauge. This tensile / compressive force gauge has an internal load cell. It is a portable traction / compression force gauge that can be installed in a force measurement stand. The measuring range of this tensile and compressive force gauge is up to 50 N / 11 lbs. So the meter is suitable for more precise tensile and compression tests.

This dynamometer is a tensile / compressive force gauge. This traction / compression force gauge has an internal load cell. It is a portable traction / compression force gauge that can be installed in a force measurement stand.

– Measuring range: 0.5 … 50 N / 0.1 … 11 lbs
– Resolution: 0.01 N / 0.002 lbs
– Evaluation via USB interface
– Different shaped measuring adapters
– Device for mounting on test stands
– incl. ISO Calibration Certificate

The dynamometer measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our dynamometers.

Dynamometer PCE-DFG N 5K
– Measuring range: 0 … 5000 N / 500 kg / 1100 lbs
– Resolution: 1N / 0.22 lbs
– Accuracy: ? 0.1% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

Test Stand PCE-MTS500
– Force range: max. 5000 N / 500 kg / 1100 lbs
– Travel path: max. 300 mm / 11.8″
– Feed speed: 30 mm/min … 230 mm/min / 1.18 … 9.05 in/min

The PCE-PFG dynamometer is a handy, digital measuring device for measuring tensile and compressive forces. The dynamometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

– Measuring range: 0 … 200 N
– Resolution: 0.05 N
– Accuracy: ? 0.3% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The PCE-PFG dynamometer is a handy, digital measuring device for measuring tensile and compressive forces. The dynamometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

– Measuring range: 0 … 2000 N
– Resolution: 0.5 N
– Accuracy: ? 0.3% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The PCE-PFG dynamometer is a handy, digital measuring device for measuring tensile and compressive forces. The dynamometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

– Measuring range: 0 … 50 N
– Resolution: 0.01 N
– Accuracy: ? 0.3% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The PCE-PFG dynamometer is a handy, digital measuring device for measuring tensile and compressive forces. The dynamometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

– Measuring range: 0 … 500 N
– Resolution: 0.1 N
– Accuracy: ? 0.3% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The PCE-PTR 200N dynamometer is a hand-held device up to 200 N. The PCE-PTR 200N dynamometer can determine the units N, kg and lb. The PCE-PTR 200N dynamometer comes with various shaped adapters. With the PCE-PTR 200N dynamometer both tensile and compressive forces can be measured.

– Measuring range: 0 … 200 N / 0 … 45 lbs
– Measurement accuracy: ? 0.5%
– Units: n, kg, lb
– Integrated load cell with M6 connection
– Evaluation via USB interface
– Downloadable evaluation software

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

– Force range: max. 500 N / 50 kg / 110 lb
– Travel path: max. 270 mm / 10.6″
– Feed speed: 1 … 500 mm/min
– Manual or automatic procedure

Dynamometer
Digital dynamometer for tensile force measurement and compressive force measurement up to 500 N. The digital dynamometer is for precise measurements with a resolution of 0.1 N.

– Measuring range: 0 … 500 N
– Accuracy: ? 0.1% of the measuring range
– Tensile and compressive force measurement
– 1600 Hz sampling rate
– Interface: USB
– 6 different measuring tips
– Memory for 100 measurements