E-SHOP

The dynamometer PCE DFG N 5K-ICA measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

– Measuring range: 0 … 5,000 N / 0 … 1,124 lbs
– Resolution: 1 N / 0.22 lbs
– Accuracy: ? 0.1% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

– Measuring range: 0 … 0.5 kN / 500 N / 112 lbs
– Resolution: 0.05 N / 0.01 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The Dynamometer PCE-DFG NF 0.5K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

– Measuring range: 0 … 0.5 kN / 500 N / 112 lbs
– Resolution: 0.05 N / 0.01 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-DFG NF 10K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has several threaded holes on the underside, which enable a fixed installation.

– Measuring range: 0 … 10 kN / 10,000 N / 2245 lbs
– Resolution: 1 N / 0.22 lb
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The Dynamometer PCE-DFG NF 10K-ICA with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has several threaded holes on the underside, which enable a fixed installation.

– Measuring range: 0 … 10 kN / 10,000 N / 2245 lbs
– Resolution: 1 N / 0.22 lb
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the underside that allow a firm installation.

– Measuring range: 0 … 1 kN / 1,000 N / 225 lbs
– Resolution: 0.1 N / 0.02 lbs
– Accuracy: ?0.5 % of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The Dynamometer PCE-DFG NF 1K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the underside that allow a firm installation.

– Measuring range: 0 … 1 kN / 1,000 N / 225 lbs
– Resolution: 0.1 N / 0.02 lbs
– Accuracy: ?0.5 % of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-DFG NF 20K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has several threaded holes on the underside, which enable a fixed installation.

– Measuring range: 0 … 20 kN / 20,000 N / 4,500 lbs
– Resolution: 2 N / 0.5 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The Dynamometer PCE-DFG NF 20K-ICA with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has several threaded holes on the underside, which enable a fixed installation.

– Measuring range: 0 … 20 kN / 20,000 N / 4,500 lbs
– Resolution: 2 N / 0.5 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

– Measuring range: 0 … 2 kN / 2,000 N / 450 lbs
– Resolution: 0.2 N / 0.04 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The Dynamometer PCE-DFG NF 2K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

– Measuring range: 0 … 2 kN / 2,000 N / 450 lbs
– Resolution: 0.2 N / 0.04 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-DFG NF 50K with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has several threaded holes on the underside, which enable a fixed installation.

– Measuring range: 0 … 50 kN / 50,000 N / 11,240 lbs
– Resolution: 5 N / 1.1 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The Dynamometer PCE-DFG NF 50K-ICA with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has several threaded holes on the underside, which enable a fixed installation.

– Measuring range: 0 … 50 kN / 50,000 N / 11,240 lbs
– Resolution: 5 N / 1.1 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

– Measuring range: 0 … 5 kN / 5,000 N / 1,124 lbs
– Resolution: 0.5 N / 0.1 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display

The Dynamometer PCE-DFG NF 5K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

– Measuring range: 0 … 5 kN / 5,000 N / 1,124 lbs
– Resolution: 0.5 N / 0.1 lbs
– Accuracy: ? 0.5% of the measuring range
– Memory for 100 measurements
– USB interface
– Graphic display
– Incl. ISO calibration certificate

The dynamometer PCE-FM 200-ICA is a handheld device that measures up to 200 N. The dynamometer can determine the units N, kg and lb. The dynamometer is supplied with various adapters that have different shapes. The dynamometer can measure both tensile and compressive forces.

– Measuring range: 2 … 200 N / 0.2 … 20 kg / 0.4 … 45 lbs
– Measurement accuracy: ?0.5%
– Units: N, KG, lb
– Integrated load cell with M6 connection
– Evaluation via USB interface
– Downloadable evaluation software
– Incl. ISO Calibration Certificate